Mounting a non-illuminated outdoor house number or address plaque is mostly about placement, wall type, and level alignment—not electrical work. This guide covers stainless steel, solid aluminum, acrylic, and rusted metal plaques from Grotrevleg for homes in the United States, Canada, and Australia.
Choose the mounting spot first
Stand at the curb or driveway and look at where guests and delivery drivers naturally look. Prefer a clear wall section near the primary entrance, garage face, or gate pillar—away from dense vines, dark shutters that hide contrast, or busy trim. Leave space around the plaque so brick joints and siding seams do not crowd the edges.
- Wide walls: horizontal street-name plaques and classic number layouts usually read best.
- Narrow columns: vertical rusted metal or slim stainless numbers fit cleaner.
- Pillars: square rusted metal or compact aluminum plaques often sit well.
Still sizing the plaque? Use our house number size guide.
Match hardware to the wall
Grotrevleg plaques ship with mounting hardware suited to common masonry installs; other walls may need alternate anchors. Brick and concrete typically use the included masonry anchors. Wood siding may need wood screws of the right length. Vinyl or fiber cement can need special anchors—when unsure, ask a local installer.
Floating stainless and acrylic designs use standoffs; solid aluminum plaques often float about 1.5 cm off the wall. Keep that clearance clear of thick insulation or irregular stone so the plaque sits flush and level.
Mark, level, then drill
- Hold the plaque (or a paper template) at the final height and check it with a bubble level.
- Mark hole centers through the mounts or template.
- Drill with a bit matched to the anchors; vacuum dust from holes.
- Set anchors, then fasten standoffs or screws snugly—do not overtighten acrylic or thin faces.
Placement tips by material
304 stainless house numbers and stainless address plaques pair well with modern façades and need good contrast against dark brick. Solid aluminum plaques show depth best on flat masonry. Acrylic house numbers look sharp on smooth painted walls. Rusted metal numbers suit craftsman and farmhouse entrances—expect natural finish variation.
When you do need lighting notes
If you are mounting an illuminated sign instead, read the LED installation notes and compare LED vs RGB before drilling for power. For daytime-only plaques, no outdoor outlet is required.
More ordering questions: FAQs and our shipping and lead-time guide.
